Reflectix Insulation in Burbank, CA | Airtight Insulation Co
We provide independent Reflectix service across Burbank, and the thing that separates our work here is simple: we know what this product does right, and we know exactly where it goes wrong in 1940s-to-1960s bungalow attics with shallow rafters and vented roofs. We’re not authorized, sponsored, or endorsed by Reflectix, which means we’re free to tell you the truth about whether foil belongs in your Burbank attic and how to make it perform. That honesty matters more here than in most places because Burbank’s summer attic temperatures push 130°F, and a radiant barrier that’s installed wrong isn’t just useless, it’s actively trapping heat and moisture. If you’re researching Reflectix for a Burbank home, call us at (833) 390-7079 for a straight answer and a free estimate.
Why Burbank Residents Choose Us for Reflectix Service
Most insulation crews in Burbank will staple up whatever foil roll the homeowner bought at a box store and call it done. We won’t, because we’ve spent years learning what blueprints and product labels don’t teach you. Ruben Acosta, our owner, came up through the construction technology program at Rio Hondo College and has spent the better part of three decades in San Fernando Valley attics. He’s seen what happens when non-perforated foil goes flat across rafters and traps condensation against roof sheathing. That experience is what we bring to every Reflectix sales & service job in Burbank. We also carry eight insulation brands, from Owens Corning and Johns Manville to Rockwool mineral wool and Icynene spray foam, so if Reflectix isn’t the right call for your specific roof assembly, we’ll say so and recommend what is. No gaps, no guesses, just insulation that does exactly what it’s supposed to. That’s the standard.
Common Reflectix Insulation Problems We Solve in Burbank
Here’s what we see again and again in Burbank attics, and what we do about each one:
- Sagging foil with dead air gaps. Reflectix Double Reflective Insulation Roll is a bubble-core foil product. When it’s stapled across rafters without a continuous backing, the facing delaminates and sags. The radiant performance drops to near zero, and hot attic air pools behind the foil exactly where you don’t want it. We pull the sagging runs, re-staple on proper spacing, or replace with a configuration that fits the rafter depth.
- Non-perforated foil trapping moisture. This is the big one in Burbank. Winter nights on the valley floor drop low enough for condensation cycles, and non-perforated Reflectix installed tight against the roof deck traps that moisture. The result is damp sheathing and staining at the rafters that you won’t see until the damage is already underway. We identify it early, before it becomes a rot repair.
- Foil over compressed 1940s-60s batts. In Burbank’s Lockheed-era housing stock, the original batts in shallow-rafter attics have long since flattened. Someone staples Reflectix over the top and it looks clean, but it’s a double vapor trap. The foil stays bright while the batt underneath stays wet and the insulation value is gone. We remove both layers, fix the venting, and start fresh.
- Unsealed seams and edges. Reflectix only works as a continuous radiant surface. When the seams and ridge and eave lines were never sealed with Reflectix foil tape, the barrier reads as installed but behaves like a sieve in 100°F attic heat. We re-tape every seam with Reflectix foil tape and verify the coverage before we call the job done.
- Reflectix stapled over knob-and-tube-era penetrations. Burbank’s older bungalows in the 91501 and 91506 flats often have top-plate wiring and recessed can lights from later rewires. Foil tucked around these penetrations carelessly creates contact points, tears, and unsealed gaps. We work around every can and wire run, sealing each penetration properly so the barrier actually functions as one continuous surface.
Reflectix Service in Burbank: What Local Conditions Mean for Your Equipment
Here’s the thing about Burbank that changes how Reflectix work gets done, and you won’t read this on a generic insulation page. Burbank’s residential lots are dense. Really dense. A single-story stucco bungalow off Magnolia or Burbank Boulevard sits close enough to the neighbors that the fence line is basically the property line. That means our compressor and material drop often land within a few feet of a neighbor’s yard, so Reflectix roof-deck work here usually means hand-carrying rolls through a 24-inch scuttle rather than setting up a staging pad. You don’t hit that constraint on Valley lots with room to breathe, or when doing Reflectix in North Hollywood. It slows the job down a little, but it also forces us to plan every attic entry carefully and protect the finished interiors below. That constriction is real, it’s specific to Burbank’s urban footprint, and it’s why we send crews who know these houses, not whoever’s available.
Reflectix Models & Products We Service in Burbank
We work with the full Reflectix lineup that shows up in Burbank homes. That includes the Double Reflective Insulation Roll in 16-inch and 24-inch widths, the R-21 Attic Wall Radiant Barrier with perforated foil facing, single-reflective radiant barrier facing for roof deck and rafter runs, and Reflectix foil tape for seaming and edge sealing. When a homeowner wants Reflectix specifically, we spec genuine Reflectix rolls and Reflectix foil tape for the job. When the roof assembly calls for something different, like a comparable perforated radiant barrier with the right perm rating, we’ll recommend that instead and tell you why before we ever open a roll. No surprise substitutions, no bait-and-switch. We let the job pick the product.
Reflectix Service Pricing in Burbank
Reflectix radiant barrier installation in Burbank typically runs from $1,200 to $2,500 for a standard single-story attic, depending on square footage, rafter depth, and how much of the existing insulation needs to come out first. Tape-only seam repair and edge sealing usually lands between $180 and $450. For attics where we’re removing the old Reflectix and collapsed batts, adding baffles at the eaves, and re-installing perforated R-21 plus blown-in top-up, expect $3,000 to $5,000. Your free estimate walks through what we’re seeing in your attic, what needs to come out, what goes back in, and the line-item cost for each step. Call (833) 390-7079 and we’ll give you numbers you can actually plan around.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well, and we also provide Reflectix service in Studio City. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs: Reflectix Insulation in Burbank
Yes, when it’s the perforated R-21 product installed with an air gap and sealed seams. In a Burbank attic that hits 130°F, a properly installed radiant barrier drops the radiant heat load on your AC by a measurable amount, especially in older bungalows with minimal ceiling insulation. What doesn’t help is non-perforated foil stapled flat with open seams. Call (833) 390-7079 for an honest read on what your attic can actually support.
No, and we won’t pretend otherwise. If the foil is non-perforated and the batts below are compressed, topping up would just add weight to a vapor trap that’s already holding moisture against your sheathing. We pull the foil, assess the batts, fix the venting, and then decide what goes back in. It costs more up front, but it’s cheaper than chasing rot later.
A properly installed perforated radiant barrier with an air gap is compatible with Burbank’s Title 24 enforcement, and in many cases it complements a cool-roof setup by reducing attic heat gain. The thing to watch is sealing: if the foil creates an unvented, moisture-collecting surface, that’s a code and durability problem. We’ll verify your roof assembly before we recommend anything.
Reflectix repair in Glendale covers similar knee-wall jobs, and here in Burbank, Reflectix radiant barrier works in knee walls too—mid-century homes with side attics and dormer spaces often benefit from it there. Crawl spaces are a different situation, because moisture management matters more than radiant reflection below a floor. We’ll tell you where the product makes sense and where it doesn’t.
Carefully, and with specific clearances for every penetration. You can’t just staple foil over live wiring and call it good. We seal around each can and wire run, keep the foil off the electrical, and make sure the radiant surface stays continuous without creating a contact hazard. It takes longer, and it’s the only way to do it in Burbank’s older housing stock.
Service Areas Near Burbank
From Burbank, we regularly work in Burbank service area neighborhoods and the surrounding cities: South El Monte, El Monte, Whittier, South Whittier, Sierra Madre, and Artesia. If you’re in one of those areas and you’re not sure who to call for a radiant barrier issue, call us and we’ll sort it out. We also serve Reflectix service in Silver Lake and Reflectix service in Gardena for customers on the west side of the Valley.
Book Your Reflectix Service in Burbank Today
If your Burbank attic has Reflectix that’s sagging, trapping moisture, or just not doing its job, call us at (833) 390-7079. We’ll schedule an inspection, walk through what we find, and give you a free estimate before you commit to anything.
Written by Ruben Acosta, Owner at Airtight Insulation Co, serving Burbank, Reflectix in Universal City, and the San Gabriel Valley.